Sujet: Layer Stack-up Flex Pool

Layer Stack-up Flex Pool
Wir bieten jedoch Multilayer nur als Prototypen nach unserem PCB-POOL(R)-Prinzip an. Bitte senden Sie uns Ihre Anfrage an Preisanfrage@pcb-pool.com. Wir werden Ihnen dann schnellst möglich ein Angebot zukommen lassen.
faschingsferien bayern 2023
02/10/2024 14:46:30
Layer Stack-up Flex Pool
Layer Stack-up Flex Pool
1
02/10/2024 14:46:30
Layer Stack-up Flex Pool
Layer Stack-up Flex Pool
I am looking at the layer stack-up of the Flex Pool option, and I see some differences between the layer stack-up indicated in the online specifications page (https://eu.beta-layout.com/pcb/pcb-types/flexible-pcbs/) versus the layer stack-up indicated in the pds datasheet available for download from the same page (https://eu.beta-layout.com/download/spezifikation/Datasheet_Parameter_Flex_190319_en.pdf).

Which one is correct and actual?

The stack-up indicated in the pdf page indicates 2 additional 0.15mm adhesive layers between the middle polyimid dielectric and the adjacent copper layers, but in this case the total thickness does NOT add up to 0.2mm.

The pdf datasheet also indicates the copper thickness as 18um only, but I take it from the specification webpage that at the end there will be a final thickness of 22um (including galvanic) is that correct?


Regards,
Cristian
02/10/2024 14:46:30
Layer Stack-up Flex Pool
répondre