A linear current sensor based on the ACS712 Hall-Effect sensor.

When connected to power supply at pin + and pin -, pin S will get an analog signal.

It can measure both AC and DC signals and can handle an overcurrent up to five times of the nominal current.

This Brick works best with the Arduino Sensor Shield or the Arduino Mega Sensor shield. It is connected via 3-core Connect Cable.
Numéro de l'article: RK-10312
Disponibilité: sur demande
Brut: 8,40 EUR
Net: 7,06 EUR

plus les frais de livraison

Quantité commandée: