A two-in-one temperature sensor.
Power is supplied via pin + and pin -.
The analog signal can be read at pin S.
In digital mode, the sensor operates as a temperature-dependent switch. The switching point can be set on the potentiometer.
This brick works best with the Arduino Sensor Shield or the Arduino Mega Sensor shield. It is connected via 3-core Connect Cable.
Power is supplied via pin + and pin -.
The analog signal can be read at pin S.
In digital mode, the sensor operates as a temperature-dependent switch. The switching point can be set on the potentiometer.
This brick works best with the Arduino Sensor Shield or the Arduino Mega Sensor shield. It is connected via 3-core Connect Cable.
Commande