A general purpose LED module.

When you connect the - pins to GND, the digitla I/O output to S pin.

When output is in the high level, the LED will be on. When output is in the low level, the LED will be off.

This Brick works best with the Arduino Sensor Shield or the Arduino Mega Sensor shield. It is connected via 3-core Connect Cable.
Commande
Numéro de l'article: RK-10299
Disponibilité: immédiat
Brut: 1,56 EUR
Net: 1,34 EUR

plus les frais de livraison

Quantité commandée: