USB connector, type B, socket for your front panel
By fixing the USB socket on your front panel with screws, you can ensure stable, safe assembly.
Protection index IP 67 in connected or disconnected status
Nickel plated pressure cast connector housings
Black housing, UL94V-0
Contact enhancement: Gold
Nominal current: 1.5 A
Nominal voltage: 100 V DC @ -25°C → +85°C
Dielectric strength: 500 V AC RMS, 60 Hz for 1 minute
Operating temperature range: -40°C → +105°C
Technical data:
By fixing the USB socket on your front panel with screws, you can ensure stable, safe assembly.
2 countersunk head screws, M 2.5 x 8 mm, are supplied for assembly.
You can connect the socket directly to your printed circuit board via push-through installation; the connections are located at right angles downwards/upwards. Push-in or solder cable connections are also possible.
Product details:
USB sockets provide an ideal solution for data transmission, even under harsh environmental conditions that require a sturdy, reliable connector. In connected or disconnected status, these USB sockets are submersible in water, rather than just being water-repellent. They are designed for industrial and military communication, together with mobile and other demanding connector uses.
These USB connectors feature the following functions:Protection index IP 67 in connected or disconnected status
Nickel plated pressure cast connector housings
Black housing, UL94V-0
Contact enhancement: Gold
Nominal current: 1.5 A
Nominal voltage: 100 V DC @ -25°C → +85°C
Dielectric strength: 500 V AC RMS, 60 Hz for 1 minute
Operating temperature range: -40°C → +105°C
Technical data:
Gender | Female |
Type of connection | Soldering |
Housing orientation | Right angle |
Contact material | Phosphor Bronze |
Assembly type | Push-through installation |
Number of ports | 1 |
Nominal current | 1.5A |
Max. operating temperature | 85°C |
Min. operating temperature | -40°C |
Commande