USB connector, type B, socket for your front panel

By fixing the USB socket on your front panel with screws, you can ensure stable, safe assembly.

2 countersunk head screws, M 2.5 x 8 mm, are supplied for assembly.

You can connect the socket directly to your printed circuit board via push-through installation; the connections are located vertically at the back. Push-in or solder cable connections are also possible.

Product details:

USB sockets provide an ideal solution for data transmission, even under harsh environmental conditions that require a sturdy, reliable connector. In connected or disconnected status, these USB sockets are submersible in water, rather than just being water-repellent. They are designed for industrial and military communication, together with mobile and other demanding connector uses.

These USB connectors feature the following functions:

Protection index IP 67 in connected or disconnected status
Nickel plated pressure cast connector housings
Black housing, UL94V-0
Contact enhancement: Gold

Nominal current: 1.5 A
Nominal voltage: 100 V DC @ -25°C → +85°C
Dielectric strength: 500 V AC RMS, 60 Hz for 1 minute
Operating temperature range: -40°C → +105°C

Technical data:

Gender Female
Type of connection Soldering
Housing orientation Straight
Contact material Copper alloy
Assembly type Push-through installation
Number of ports 1
Nominal current 1.5A
Max. operating temperature 105°C
Min. operating temperature -40°C
Commande
Numéro de l'article: RK-10875
Disponibilité: immédiat
Brut: 11,20 EUR
Net: 9,66 EUR

plus les frais de livraison

Quantité commandée: