By fixing the USB socket on your front panel with screws, you can ensure stable, safe assembly.
2 countersunk head screws, M 2.5 x 8 mm, are supplied for assembly.
You can connect the socket directly to your printed circuit board via push-through installation; the connections are located vertically at the back. Push-in or solder cable connections are also possible.
USB sockets provide an ideal solution for data transmission, even under harsh environmental conditions that require a sturdy, reliable connector. In connected or disconnected status, these USB sockets are submersible in water, rather than just being water-repellent. They are designed for industrial and military communication, together with mobile and other demanding connector uses.These USB connectors feature the following functions:
Protection index IP 67 in connected or disconnected status
Nickel plated pressure cast connector housings
Black housing, UL94V-0
Contact enhancement: Gold
Nominal current: 1.5 A
Nominal voltage: 100 V DC @ -25°C → +85°C
Dielectric strength: 500 V AC RMS, 60 Hz for 1 minute
Operating temperature range: -40°C → +105°C
|Assembly type||Push-through installation|
|Type of connection||Soldering|
|USB Version||Type A|
|Housing orientation||Right angle|
|Number of ports||1|
|Supply voltage||100 V DC|
|Min. operating temperature||-25°C|
|Max. operating temperature||105°C|